Vanquish Products VS410 Phoenix Portal Rock Crawler Kit - New Jersey - Jersey City ID1518218

Vanquish Products VS4-10 Phoenix Portal Rock Crawler Kit

The Vanquish VS4-10 Phoenix Portal Rock Crawler Kit is the first platform to feature the Vanquish Products VFD Twin transmission (patent pending) and F10 Portal Axles. This combination provides performance advantages never before offered in a scale kit of its kind. The VFD Twin incorporates Selectable Overdrive Shifting and a 3-position dig unit into one compact package. The molded F10 Portal Axles utilize a high clearance design which minimizes the size of the pumpkin and maximizes clearance around the C-hub and knuckle. Connecting the VFD Twin to the F10 Portal Axles are the ISD10 driveshafts. The ISD10 Driveshafts have machined CV style joints at each end with molded splined shafts between them for smooth and efficient performance.

NOTE:

• Finished kit shown in photos is for illustrative purposes only. See needed to complete list below for a list of items required to complete the model.
• On page 13 of the included manual, the e-clip is omitted from the transfer case shaft (VPS10143). See updated manual in resources tab for clarification.

Features:

• Drivetrain
• VFD Twin Transmission - Selectable Overdrive and Dig (Patent Pending)
• F10 Portal Axle Housings
• Offset Pumpkin Front Portal Axle
• Centered Pumpkin Rear Portal Axle
• Brass Inner Reinforcement Tubes
• Machined Portal Gears
• Universal-style front axle shafts
• Double Shear Shock Mounts
• Aluminum 12mm Hexes for 6mm output shafts
• ISD10 Driveshafts
• VFD Twin Transmission
• On the fly Selectable Overdrive
• Standard Overdrive 6.5%
• Selectable High Overdrive 33%
• Mechanical Overdrive Lockout to set Overdrive in Either 6% or 33% Positions
• Use Overdrive neutral position for 2WD (disengage front output)
• Dig with 3 Positions
• Mechanical Dig Lockout
• Compatible with 540 brushed and brushless motors (Fits most 540 brushed and brushless motors)
• Slipper Clutch
• Sintered Internal Gears
• Hardened Chromoly Shafts
• Molded VFD Twin Extended Skid Plate for Motor Protection
• Molded Battery and Electronic trays
• Full ball bearing transmission
• Sintered Shift arms with Brass pivot shift bushing
• Chromoly slide dogs for Overdrive and Dig shifting
• Scale Molded Transmission Housing
• Molded Bearing Plates
• Molded 6mm motor plate
• Molded Spur Gear Cover
• 32P 52T Spur and 15T Steel Pinion
• Silicone dust shields for shift arms (Transmission dust shield is not 100% element proof. Use access cover to regularly check transmission for debris and add grease as needed.)
• F10 Portal Axles
• Molded Axle housings
• Machined Chromoly Portal Gears
• Universal Style Axle Shafts
• 49 Degrees of Steering
• High Caster reinforced C-Hub
• High-Pinion Hypoid Machined Axle Gears (30/8)
• 6-Bolt Ring Gear and Spool
• 1.4:1 Portal Gear Ratio
• 6mm Output shafts with M5 wheel nut
• One-Piece Molded Bearing Retainers
• Adjustable Lower Shock Mounting Position
• Chromoly universal shafts
• Brass tube inserts
• Scale removable third member
• Machined aluminum red anodized rear fill cap with molded install tool

• Chassis
  • Heavy Duty High Clearance Steel C-Channel Frame Rails
  • Molded Front Inner Fenders with integrated LED mounts
  • Phoenix Molded Rock sliders
  • Phoenix High Clearance Bumpers
  • Integrated battery tray and electronic mounting positions
  • VFD Twin Overdrive and Dig servo mounts
  • Stainless Steel links
  • Molded inner fenders with front body hinge and scale radiator mount
• Suspension
• Stainless Steel Links
• Stainless Steel Pivot Balls
• S8E Scale 80mm Shocks
• The Incision S8E Scale Shocks feature a larger 8mm bore for increased dampening & longer seal life
• Dual molded X-Ring lower shock cartridge provides more sealing surfaces than standard o-rings
• Threaded shock bodies allow a wide spring preload range
• Scale shock cap with steel pivot ball and bleeder screw
• Offset lower shock pivot balls allow for greater flexibility for tuning shock angles
• Polished Shock shafts
• Phoenix Body
• VRD1 Rear Cage
• 3-Piece Body Design
• Removable Bed Sides
• Headlight and Tail Light buckets
• Molded Grill
• Hinged Design
• Hidden body clips with quick release front pivot pin
• Full interior
• Molded details parts (Wipers, Gear shifter, Steering wheel)
• Wheels and Tires
• 1.9 VXT Tires
• 1.9 Incision KMC KM233 Hex Beadlock Wheels

Specifications:

Overall Width: 250mm (9.84") Overall height: 250mm (9.84") Wheelbase: 313mm (12.3") Overall Front Ratio (Standard 6.5% OD): 53.7:1 Overall Front Ratio (High 33% OD): 41.1:1 Over Rear Ratio: 57.2:1 Average RTR weight: 6.5lbs (2.9kg) (can vary with electronics) Front axle width pin to pin: 190mm (7.5") Rear axle width pin to pin: 188mm (7.35") Needed to Complete:

• ESC
• 540 Motor
• Steering Servo (Vanquish 20mm servo horn recommended)
• Battery
• Transmitter and Receiver
• Polycarbonate Paint for Body
• Tools for Assembly

Additional Electronics for VFD Twin Functionality:

• (2) Standard size servos for Dig and Selectable Overdrive (Standard or Low Profile)
• (2) 24mm servo horns
• 4 Channel Transmitter and Receiver

When you call, don't forget to mention that you found this ad on CLASSTIZE.COM

Price 200 I am Offering Category is For Sale Type is Video Games - Consoles - Toys Ad placed in Jersey City Phone no: 083159484758 Address: FX Sudirman Jl. Jenderal Sudirman, Gelora, Kecamatan Tanah Abang, Kota Jakarta Pusat, Daerah Khusus Ibukota Jakarta 10270 Email Address

---